Slab Leak Detection & Repair in Bend, OR

Yes — we handle slab leak detection and repair in Bend, OR, and the job begins with finding the leak, not breaking up your floor. A slab leak is a pressurized water line failing beneath the concrete foundation your house sits on, and because it's sealed under the slab it can run for weeks before the signs add up. We pinpoint it with electronic equipment, show you the honest options, and fix it with as little disruption as the pipe allows.

Cross the kitchen barefoot and feel a spot warmer than the tile around it. Hear water moving when nothing's running. Watch your water heater cycle more than it used to, or a thin crack work its way across the concrete. Any one of these can mean a supply line is leaking under your foundation. Left alone, a slab leak doesn't stay small — it undermines the slab, feeds mold, and quietly wastes water every hour of every day. The sooner it's found, the smaller the fix.

What a slab leak actually is

Your home's water lines don't stop at the walls. Some of them run through or beneath the concrete slab your house sits on. When one of those hidden pipes springs a leak — from corrosion, abrasion against the concrete, a bad fitting, or plain age — the water has nowhere obvious to go. It saturates the ground under your foundation, warms a section of floor if it's a hot line, and shows up on your bill long before it shows up as a puddle.

There are two kinds. A leak on a hot line often gives itself away with a warm patch of floor. A leak on a cold line is quieter and usually found by pressure and sound. Either way, the pipe is under load around the clock, so a pinhole today is a bigger problem next month.

The warning signs, before it gets expensive

Slab leaks are sneaky by nature, but they do leave tracks:

• A patch of floor that's unexplainably warm underfoot
• The sound of running water with every fixture turned off
• A jump in your water bill you can't account for
• Water pressure that's dropped across the house
• New cracks in the slab, tile, or drywall
• A damp or musty area of flooring, or baseboards wicking moisture
• A mildew smell that won't clear, or a spot that stays warm and never dries

If you're seeing a couple of these together, don't wait it out. Our rundown of the warning signs of a hidden water leak goes deeper, and the same instinct applies here: trust the clues and get it checked before the damage spreads into the framing and flooring.

What our slab leak service includes

This is more than a quick look and a guess. When you call us out for a slab leak, the visit covers:

• A full diagnosis to confirm the leak is genuinely under the slab, not a fixture, drain, or wall line
• A pressure test that isolates the hot and cold systems so we know which line is failing
• Electronic leak location — acoustic listening and line tracing — to mark the exact spot and depth
• A clear, flat-rate quote with your repair options laid out before any concrete is touched
• The repair itself: a targeted spot fix, a reroute around the bad line, or a repipe when that's the smarter call
• A verification pass — we re-pressurize and re-check to confirm the leak is truly gone
• Careful access and cleanup, with the smallest opening the job allows

You get the diagnosis and the plan before you commit to the fix. No surprises mid-job.

How we find and fix it, step by step

1. Confirm it's a slab leak. We isolate and pressure-test the plumbing to rule out fixtures, drains, and above-slab lines. Guessing wrong here is how floors get opened for nothing.
2. Locate it to the inch. We bring in electronic leak-location gear — acoustic sensors and line tracing — to follow the pipe under the slab and mark the leak's exact position and depth.
3. Lay out your options and price it. You get a flat, upfront quote with the trade-offs between a spot repair, a reroute, and a repipe explained plainly.
4. Make the fix. Whether it's a small targeted opening, a new line rerouted through the walls, or a full repipe, we do the work cleanly and to code.
5. Verify and close up. We re-pressurize, confirm the leak is gone, and restore the access we made. You get a system that holds pressure and a floor that's dry for good.

Precise location is the difference between a small, targeted opening and a torn-up floor, and it's where our leak detection experience really pays off. The mistake to avoid is opening the concrete on a hunch — jackhammering a slab on a guess is how a modest repair becomes a demolition.

Your options: spot repair, reroute, or repipe

Once we know exactly what we're dealing with, we lay out the honest trade-offs so you choose the path, not us:

• Targeted spot repair. For a single, accessible leak in otherwise sound piping, we open a small section, fix the pipe, and close it back up. Least invasive, lowest cost.
• Reroute. Rather than break through the slab, we can often bypass the failed line by running a new one through the walls or ceiling, abandoning the bad pipe in place. This avoids major concrete work and is frequently the smart call for a line that's awkward to reach.
• Repipe. When the leak is one symptom of piping that's failing throughout — common in older homes — a full whole-house repipe in PEX solves the whole problem at once instead of setting you up for the next slab leak a year from now.

There's no single right answer. The best choice depends on the pipe's condition, how accessible the leak is, and how much life the rest of the system has left. We'll walk you through it plainly, and if a reroute or repipe makes more sense than chasing one leak under the concrete, we'll tell you why.

What drives the cost

We price it flat and upfront, but a few things shape the scope: the leak's depth and position under the slab, the flooring on top of it (plain concrete versus tile, hardwood, or finished surfaces), whether a spot repair or a full reroute is the wiser fix, how much of the line is corroded, and any restoration afterward. Access matters too — a leak under a kitchen island or a closet is harder to reach than one in an open room. Rerouting away from the slab often costs less in the end than repeatedly breaking and repouring concrete. Whatever the path, you'll approve the flat price before we start.

Why Bend homeowners call us for slab leaks

A slab leak isn't the job to hand to whoever's cheapest or quickest to pick up. It rewards careful location and honest advice, and that's what we do:

• We locate before we open. Precise electronic detection means a small opening, not a demolished floor — and a repair scoped to what's actually wrong.
• Licensed, bonded, and insured. Oregon plumbers with 15+ years working on Central Oregon homes and the aging pipe that hides under them.
• A real person answers, 24/7. When you can hear water and can't find it, you don't wait for business hours — and there's no after-hours surcharge for calling late.
• Typically on-site within about 60 minutes in Bend. Fast matters when the water is running under your foundation.
• 4.9 stars from 143+ reviews, and a 100% satisfaction guarantee in writing. You approve a flat, upfront price before work starts.

Why Bend homes see slab leaks in the first place

Slab leaks show up most in slab-on-grade houses running aging copper or older piping — and Central Oregon's hard water speeds things along, corroding pipe from the inside until a pinhole opens. In homes built from the 1970s through the '90s, the original plumbing may be part of the problem to begin with; our look at polybutylene and galvanized pipe in Bend homes explains why that era of pipe fails. If the buried line feeding the house from the meter is the weak link instead, that falls under water line repair and replacement — we'll tell you which one you've got, and won't sell you the bigger job if the smaller one fixes it.

Slab leak repair across Bend and Central Oregon

We find and fix slab leaks throughout Bend and the surrounding communities. That includes the older slab-on-grade homes in Old Bend, the established and newer neighborhoods of Redmond, and homes out in Sisters. Wherever you are in the area, the approach is the same: locate it precisely, explain your options, and fix it with the least disruption the job allows.

Catch it early, keep it small

A slab leak is one of those problems that only gets more expensive the longer it hides. If your floor has a warm spot, your pressure has slipped, or you can hear water you can't find, call Bend Plumbing Services at (207) 419-2600. We'll locate it precisely, explain your options without pressure, and fix it with as little disruption to your home as the job allows. You can also reach us through our contact page to set up a visit.